Raydafon · Product expertise from ChinaBrowse this product category ↗
Hydraulic Cylinder Manufacturer in China

Custom Hydraulic Cylinder Manufacturer in China

We manufacture hydraulic cylinder enquiries for agricultural and equipment applications, including HSG-series plant-protection and excavator-cylinder references. Send the complete installation drawing and hydraulic duty so bore, rod, stroke, mounts and seal requirements are reviewed together.

Custom Hydraulic Cylinders — Raydafon product catalogue
Custom Hydraulic Cylinders · Raydafon catalogue reference

Send a clear purchasing brief.

  • Bore, rod diameter, stroke and closed/open lengths
  • Working pressure, cycle duty and load direction
  • Mounting drawing, pins, bushes and port details
Product information at a glance

What can we supply?

Application-specific cylinders, HSG-series agricultural references and excavator-cylinder enquiries. Bore × rod diameter × stroke and closed/open mounting centres. Choose the form or construction below, then send the dimensions and quantities for your order.

Company
Raydafon Technology Group Co.,Limited
Location
Ningbo, Zhejiang, China
Enquiry scope
OEM specifications, samples, replacement review and bulk purchasing
OEM / replacement / sample / bulk order

Your custom hydraulic cylinders RFQ checklist

Information to send with your quotation request
ItemPurchasing information
1Bore, rod diameter, stroke and closed/open lengths
2Working pressure, cycle duty and load direction
3Mounting drawing, pins, bushes and port details
4Fluid, temperature, environment and seal requirements
5Test/report requirements, quantity and delivery destination

Request a sample, an OEM review or a batch quotation.

Tell us which specification is already fixed and which questions you want our team to review. Attach the current drawing, mark its revision and separate the sample quantity from the expected production demand.

Include the destination and required date. Ask us to confirm minimum order, availability, lead time, inspection documents and commercial terms for your exact requirement. We confirm these items in the proposal rather than assuming one condition applies to every catalogue product.

Send our team your RFQ ↗
Purchasing approval / product-specific records

Match the supplied product to your acceptance requirements

Bore/rod/stroke and mount dimensions, material/coating identification and the agreed pressure/leak verification record.

Drawing & identification

Keep the quoted model or material designation and approved drawing revision with your order. Mark the interfaces and features that determine fit.

Inspection scope

Tell us which measurements, tests and document formats your team needs. We confirm the available order-specific records and any exceptions in the offer.

Sample & batch approval

Separate sample acceptance from production release. Identify marking, traceability and packing requirements before confirming the batch.

Our catalogue range

Custom Hydraulic Cylinders for your purchasing review

Use these catalogue references to describe your requirement. We confirm the proposed model, current drawing and order scope in the quotation.

Product specification / drawing-based quotation

Custom hydraulic cylinder assemblies: compare the specification

Custom hydraulic cylinder assemblies — catalogue and purchasing specification
Product featureOur range & specification
Catalogue scopeApplication-specific cylinders, HSG-series agricultural references and excavator-cylinder enquiries.
Primary dimensionsBore × rod diameter × stroke and closed/open mounting centres.
Mounting interfacesPin/eye/clevis dimensions, mounting alignment and available envelope.
Hydraulic dutyWorking/design pressure, flow/speed, load direction, cycle and cushioning requirements.
Fluid/environmentFluid type, operating temperature, contamination and corrosion/coating requirements.
AcceptanceSpecify pressure/leak, dimensional and material requirements for the exact proposed cylinder.

Catalogue references identify product options, not guaranteed stock or a universal operating rating. We confirm the selected construction, dimensions and order-specific terms in the written offer.

Selection & purchasing information

Custom Hydraulic Cylinders: what we review with you

Define geometry before comparing cylinders

We ask for bore, rod diameter, stroke and the mounting-centre dimensions at the relevant positions. Include a controlled drawing with mounting eyes, clevises, pins and bushes. A cylinder that matches stroke alone can still have incompatible closed length or mounting geometry. Identify the dimensions that are mandatory and those you want our team to review.

Provide the hydraulic operating requirement

State working pressure, required movement speed, cycle frequency and the load arrangement defined by your equipment design. Identify whether the enquiry concerns a single-acting or double-acting assembly. Include relevant port and connection details. We review the proposed product against the stated duty; force, buckling and system suitability must be confirmed through the application’s engineering review.

Describe fluid, temperature and environment

Tell us the hydraulic fluid, operating temperature range and environmental exposure. Dust, washdown, outdoor storage and corrosive conditions can change the required construction. If your project specifies a particular sealing arrangement or rod surface requirement, put it in the drawing or purchasing specification. We confirm the proposed material and seal scope for the actual cylinder order.

Make replacement identification traceable

For a replacement cylinder, send the equipment model, cylinder reference, installation drawing and photographs showing the mounting and ports. Mark any changes from the original machine configuration. Our catalogue application names are reference points for enquiries; they do not substitute for confirmation of dimensions and operating requirements. Ask for the current proposed assembly drawing before approving a replacement.

Product & procurement questions

Before ordering custom hydraulic cylinder assemblies

Is a machine model enough to specify a replacement cylinder?

Use the machine reference as a starting point, then confirm the installed dimensions, ports, mounts, stroke and duty against a controlled drawing.

Can the quotation include test and inspection records?

List the test method, pressure/leak criteria, dimensions and required records with the enquiry. We confirm the order-specific scope in the offer.

Which records should we request for purchasing approval?

Bore/rod/stroke and mount dimensions, material/coating identification and the agreed pressure/leak verification record. Tell us the required method, format and scope so availability and exceptions can be confirmed in the quotation.

How do we request samples, MOQ and delivery terms?

For custom hydraulic cylinder assemblies, list sample and production quantities separately, with dimensions or drawing revisions, destination and required date. We confirm availability, minimum order and lead time for the selected items; catalogue references do not guarantee immediate stock.

How can we send drawings directly to Raydafon?

Use the enquiry form on this page. It saves the request for our company and queues email delivery. Attach up to three PDF, DWG, DXF, PNG, JPG or WebP files, up to 10 MB each, and identify the current drawing revision.

Who receives our enquiry and attachments?

Your request is addressed to Raydafon. Supplier Discovery provides the submission service and stores it privately for authorised company users and platform administrators. You can also contact us at sales@raydafon.com.

Your manufacturer & supplier contact in China

We are Raydafon.

We are Raydafon Technology Group Co.,Limited, based in Ningbo, Zhejiang, China. Our published product range covers power-transmission components and hydraulic cylinders, including sprockets, chains, gearboxes, PTO shafts, racks, couplings, pulleys and bushings.

This product website focuses on custom hydraulic cylinders. Our factory and supplier review starts with the application and controlled specification. Tell us what you need to source and request the current product information and supporting documents for your purchasing approval.

You can send a direct product enquiry here or visit our main company website ↗.

Raydafon Technology Group Co.,Limited

Luotuo Industrial Area, Zhenhai District, Ningbo City, Zhejiang, China

sales@raydafon.com+86 574 87167707+86 13083988828
Send your enquiry to Raydafon

Let us review your custom hydraulic cylinders requirement.

Send your custom hydraulic cylinder assemblies requirement directly to Raydafon. Your enquiry is saved for our team and queued for email delivery; a successful submission displays its reference.

  • Bore, rod diameter, stroke and closed/open lengths
  • Working pressure, cycle duty and load direction
  • Mounting drawing, pins, bushes and port details
  • Fluid, temperature, environment and seal requirements
  • Test/report requirements, quantity and delivery destination

You can attach permitted drawings. Include only documents you are authorised to share and identify the current revision.

Prefer email? sales@raydafon.com

How your enquiry is handled ↗

A successful submission displays an enquiry reference and is saved for our team. Email delivery is processed separately. Prefer email? sales@raydafon.com

More from the same Raydafon company

Explore our related product expertise