Raydafon · Product expertise from ChinaBrowse this product category ↗
V Belt Pulley Manufacturer in China

V-Belt Pulleys & Sheaves Manufacturer in China

We manufacture V-belt pulley and sheave enquiries with the belt section, groove count and shaft connection specified together. Our catalogue includes cast-iron 8V QD sheaves in eight-, ten- and twelve-groove references. Send the diameter and bushing requirement for the actual belt drive.

V-Belt Pulleys & QD Sheaves — Raydafon product catalogue
V-Belt Pulleys & QD Sheaves · Raydafon catalogue reference

Send a clear purchasing brief.

  • Belt section and required number of grooves
  • Pitch diameter, outside diameter and centre distance
  • Shaft bore, bushing family and mounting drawing
Product information at a glance

What can we supply?

8V belt-section catalogue sheaves; identify the exact belt standard and matching drive. Eight-, ten- and twelve-groove 8V QD catalogue configurations. Choose the form or construction below, then send the dimensions and quantities for your order.

Company
Raydafon Technology Group Co.,Limited
Location
Ningbo, Zhejiang, China
Enquiry scope
OEM specifications, samples, replacement review and bulk purchasing
Our catalogue range

V-Belt Pulleys & QD Sheaves for your purchasing review

Use these catalogue references to describe your requirement. We confirm the proposed model, current drawing and order scope in the quotation.

OEM / replacement / sample / bulk order

Your v-belt pulleys & qd sheaves RFQ checklist

Information to send with your quotation request
ItemPurchasing information
1Belt section and required number of grooves
2Pitch diameter, outside diameter and centre distance
3Shaft bore, bushing family and mounting drawing
4Motor power, speed, duty and balance requirement
5Pulley/bushing order scope, quantity and destination

Request a sample, an OEM review or a batch quotation.

Tell us which specification is already fixed and which questions you want our team to review. Attach the current drawing, mark its revision and separate the sample quantity from the expected production demand.

Include the destination and required date. Ask us to confirm minimum order, availability, lead time, inspection documents and commercial terms for your exact requirement. We confirm these items in the proposal rather than assuming one condition applies to every catalogue product.

Send our team your RFQ ↗
Purchasing approval / product-specific records

Match the supplied product to your acceptance requirements

Groove/diameter and bushing-interface dimensions, material identity and agreed balance/inspection scope.

Drawing & identification

Keep the quoted model or material designation and approved drawing revision with your order. Mark the interfaces and features that determine fit.

Inspection scope

Tell us which measurements, tests and document formats your team needs. We confirm the available order-specific records and any exceptions in the offer.

Sample & batch approval

Separate sample acceptance from production release. Identify marking, traceability and packing requirements before confirming the batch.

Product specification / drawing-based quotation

8V QD V-belt pulleys and sheaves: compare the specification

8V QD V-belt pulleys and sheaves — catalogue and purchasing specification
Product featureOur range & specification
Belt reference8V belt-section catalogue sheaves; identify the exact belt standard and matching drive.
Groove referencesEight-, ten- and twelve-groove 8V QD catalogue configurations.
Diameter/geometryState specified diameter, face width and installation clearance from the drive drawing.
Shaft mountingQD bushing reference, required bore and keyway; identify whether the bushing is included.
DutyInput speed, transmitted load and any balancing requirement for the proposed assembly.
Material/scopeCast-iron catalogue references; confirm material, finish and all supplied mounting items.

Catalogue references identify product options, not guaranteed stock or a universal operating rating. We confirm the selected construction, dimensions and order-specific terms in the written offer.

Selection & purchasing information

V-Belt Pulleys & QD Sheaves: what we review with you

Start with the belt section

Tell us the belt section and the number of grooves before discussing outside diameter. Similar-looking pulleys can have different groove profiles and are not automatically interchangeable. Include the belt designation and the drive layout where available. We review the requested pulley geometry against the specified belt rather than relying on an image or a general V-pulley description.

Distinguish pitch and outside dimensions

Specify which diameter is controlled in your drawing and provide the relevant reference dimensions. Include the centre distance and the mating drive component where they form part of the requirement. We ask for this information because a pulley’s outside measurement alone does not define the complete speed-ratio or installation requirement for the belt drive.

Define the QD bushing and shaft

Our catalogue includes QD sheave references. Tell us the bushing family, shaft bore, keyway and mounting orientation required. State whether the quotation should include the bushing or only the sheave. A removable-bushing system has several interfaces, so we confirm the proposed combination rather than assuming that every component carrying a similar label fits together.

Include power, speed and duty

Send motor power, operating speed, start-stop pattern and the driven equipment. State the balancing or other inspection requirement defined for your application. We review the requested component specification with that duty information. Do not apply a general family claim about speed or efficiency to every diameter and mounting arrangement without model-specific confirmation.

Your manufacturer & supplier contact in China

We are Raydafon.

We are Raydafon Technology Group Co.,Limited, based in Ningbo, Zhejiang, China. Our published product range covers power-transmission components and hydraulic cylinders, including sprockets, chains, gearboxes, PTO shafts, racks, couplings, pulleys and bushings.

This product website focuses on v-belt pulleys & qd sheaves. Our factory and supplier review starts with the application and controlled specification. Tell us what you need to source and request the current product information and supporting documents for your purchasing approval.

You can send a direct product enquiry here or visit our main company website ↗.

Raydafon Technology Group Co.,Limited

Luotuo Industrial Area, Zhenhai District, Ningbo City, Zhejiang, China

sales@raydafon.com+86 574 87167707+86 13083988828
Product & procurement questions

Before ordering 8v qd v-belt pulleys and sheaves

Does an 8V designation identify the complete sheave?

No. Groove count, diameter, hub/bushing interface and installation dimensions must also be specified.

Is the QD bushing supplied with the pulley?

Identify that scope explicitly. Send the bushing reference and shaft bore if a matched assembly is required.

Which records should we request for purchasing approval?

Groove/diameter and bushing-interface dimensions, material identity and agreed balance/inspection scope. Tell us the required method, format and scope so availability and exceptions can be confirmed in the quotation.

How do we request samples, MOQ and delivery terms?

For 8v qd v-belt pulleys and sheaves, list sample and production quantities separately, with dimensions or drawing revisions, destination and required date. We confirm availability, minimum order and lead time for the selected items; catalogue references do not guarantee immediate stock.

How can we send drawings directly to Raydafon?

Use the enquiry form on this page. It saves the request for our company and queues email delivery. Attach up to three PDF, DWG, DXF, PNG, JPG or WebP files, up to 10 MB each, and identify the current drawing revision.

Who receives our enquiry and attachments?

Your request is addressed to Raydafon. Supplier Discovery provides the submission service and stores it privately for authorised company users and platform administrators. You can also contact us at sales@raydafon.com.

Send your enquiry to Raydafon

Let us review your v-belt pulleys & qd sheaves requirement.

Send your 8v qd v-belt pulleys and sheaves requirement directly to Raydafon. Your enquiry is saved for our team and queued for email delivery; a successful submission displays its reference.

  • Belt section and required number of grooves
  • Pitch diameter, outside diameter and centre distance
  • Shaft bore, bushing family and mounting drawing
  • Motor power, speed, duty and balance requirement
  • Pulley/bushing order scope, quantity and destination

You can attach permitted drawings. Include only documents you are authorised to share and identify the current revision.

Prefer email? sales@raydafon.com

How your enquiry is handled ↗

A successful submission displays an enquiry reference and is saved for our team. Email delivery is processed separately. Prefer email? sales@raydafon.com

More from the same Raydafon company

Explore our related product expertise