Raydafon · Product expertise from ChinaBrowse this product category ↗
Chain Sprocket Manufacturer in China

Custom Chain Sprocket Manufacturer in China

We manufacture chain-sprocket enquiries for buyers matching the chain, shaft and hub connection. Our catalogue includes #35 QD-bushed and taper-bushed references plus standard-bore sprockets. Choose the construction, then send tooth count and the finished interface drawing for an OEM or bulk quotation.

Custom Chain Sprockets — Raydafon product catalogue
Custom Chain Sprockets · Raydafon catalogue reference

Send a clear purchasing brief.

  • Chain standard, pitch and number of strands
  • Tooth count and sprocket outside dimensions
  • Bore, keyway, hub and mounting drawing
Product information at a glance

What can we supply?

#35 QD-bushed, #35 taper-bushed and NK-series standard-bore constructions. Full chain designation, standard, strand count and tooth count. Choose the form or construction below, then send the dimensions and quantities for your order.

Company
Raydafon Technology Group Co.,Limited
Location
Ningbo, Zhejiang, China
Enquiry scope
OEM specifications, samples, replacement review and bulk purchasing
Our catalogue range

Custom Chain Sprockets for your purchasing review

Use these catalogue references to describe your requirement. We confirm the proposed model, current drawing and order scope in the quotation.

Taper-bushed sprockets — Raydafon catalogue reference

Taper-bushed sprockets

Our #35 taper-bushed catalogue design supports enquiries for a tapered mounting interface. Confirm the bushing family instead of assuming interchangeability.

Request Taper-bushed sprockets quotation ↗
Product specification / drawing-based quotation

OEM chain sprocket constructions: compare the specification

OEM chain sprocket constructions — catalogue and purchasing specification
Product featureOur range & specification
Catalogue references#35 QD-bushed, #35 taper-bushed and NK-series standard-bore constructions.
Chain interfaceFull chain designation, standard, strand count and tooth count.
Shaft connectionUnfinished/finished bore, keyway, QD or taper-bushing family and hub projection.
Material/finishState the specified material, tooth treatment and corrosion/surface requirements.
Assembly scopeSprocket alone or matched bushing/key/fastener items; confirm what is included.
InspectionMark tooth, bore and locating dimensions to be checked on the approved drawing.

Catalogue references identify product options, not guaranteed stock or a universal operating rating. We confirm the selected construction, dimensions and order-specific terms in the written offer.

Selection & purchasing information

Custom Chain Sprockets: what we review with you

Start with the chain designation

We ask for the chain standard and full designation before discussing sprocket dimensions. Pitch alone is not enough to identify a compatible tooth form or strand arrangement. Include the chain maker’s reference, roller dimensions where known and the number of strands. For replacement sourcing, a clear photograph and an existing drawing help us identify which measurements still need confirmation.

Define the shaft connection

Tell us whether you need an unfinished bore, a finished bore with a keyway, a QD-bushed design or a taper-bushed arrangement. These constructions create different purchasing scopes. A bushing may be a separate item, and a shaft diameter does not describe the complete hub. We review bore tolerance, keyway, hub projection and fastener requirements against your installation drawing.

Review material and tooth treatment

Our published range includes steel and other sprocket constructions. We need the selected material and any specified heat treatment written into the enquiry. Distinguish tooth-surface treatment from the material condition of the hub. If you require a hardness report, material document or a particular inspection method, tell us the required document and acceptance criteria before we quote.

Compare a replacement against the complete assembly

A replacement sprocket should be checked for chain alignment, axial position, available clearance and mounting details. We use the controlled drawing rather than appearance as the purchasing reference. If the old component is worn, identify the dimensions taken from a drawing and those measured from the used part. Mark any interface that cannot change on your machine.

OEM / replacement / sample / bulk order

Your custom chain sprockets RFQ checklist

Information to send with your quotation request
ItemPurchasing information
1Chain standard, pitch and number of strands
2Tooth count and sprocket outside dimensions
3Bore, keyway, hub and mounting drawing
4Material, tooth treatment and inspection requirements
5Sample or batch quantity, destination and required date

Request a sample, an OEM review or a batch quotation.

Tell us which specification is already fixed and which questions you want our team to review. Attach the current drawing, mark its revision and separate the sample quantity from the expected production demand.

Include the destination and required date. Ask us to confirm minimum order, availability, lead time, inspection documents and commercial terms for your exact requirement. We confirm these items in the proposal rather than assuming one condition applies to every catalogue product.

Send our team your RFQ ↗
Purchasing approval / product-specific records

Match the supplied product to your acceptance requirements

Chain/tooth designation, bore/keyway and hub dimensions, plus specified material/tooth-treatment records.

Drawing & identification

Keep the quoted model or material designation and approved drawing revision with your order. Mark the interfaces and features that determine fit.

Inspection scope

Tell us which measurements, tests and document formats your team needs. We confirm the available order-specific records and any exceptions in the offer.

Sample & batch approval

Separate sample acceptance from production release. Identify marking, traceability and packing requirements before confirming the batch.

Your manufacturer & supplier contact in China

We are Raydafon.

We are Raydafon Technology Group Co.,Limited, based in Ningbo, Zhejiang, China. Our published product range covers power-transmission components and hydraulic cylinders, including sprockets, chains, gearboxes, PTO shafts, racks, couplings, pulleys and bushings.

This product website focuses on custom chain sprockets. Our factory and supplier review starts with the application and controlled specification. Tell us what you need to source and request the current product information and supporting documents for your purchasing approval.

You can send a direct product enquiry here or visit our main company website ↗.

Raydafon Technology Group Co.,Limited

Luotuo Industrial Area, Zhenhai District, Ningbo City, Zhejiang, China

sales@raydafon.com+86 574 87167707+86 13083988828
Product & procurement questions

Before ordering oem chain sprocket constructions

Are QD and taper-bushed sprockets the same interface?

No. Identify the mounting/bushing family and mating shaft/hub data. Do not assume interchangeability from a similar outside diameter.

Can you quote a replacement without the full original drawing?

Send the chain designation, tooth count, measured interfaces and clear photographs. Identify worn or uncertain dimensions so they can be resolved before production approval.

Which records should we request for purchasing approval?

Chain/tooth designation, bore/keyway and hub dimensions, plus specified material/tooth-treatment records. Tell us the required method, format and scope so availability and exceptions can be confirmed in the quotation.

How do we request samples, MOQ and delivery terms?

For oem chain sprocket constructions, list sample and production quantities separately, with dimensions or drawing revisions, destination and required date. We confirm availability, minimum order and lead time for the selected items; catalogue references do not guarantee immediate stock.

How can we send drawings directly to Raydafon?

Use the enquiry form on this page. It saves the request for our company and queues email delivery. Attach up to three PDF, DWG, DXF, PNG, JPG or WebP files, up to 10 MB each, and identify the current drawing revision.

Who receives our enquiry and attachments?

Your request is addressed to Raydafon. Supplier Discovery provides the submission service and stores it privately for authorised company users and platform administrators. You can also contact us at sales@raydafon.com.

Send your enquiry to Raydafon

Let us review your custom chain sprockets requirement.

Send your oem chain sprocket constructions requirement directly to Raydafon. Your enquiry is saved for our team and queued for email delivery; a successful submission displays its reference.

  • Chain standard, pitch and number of strands
  • Tooth count and sprocket outside dimensions
  • Bore, keyway, hub and mounting drawing
  • Material, tooth treatment and inspection requirements
  • Sample or batch quantity, destination and required date

You can attach permitted drawings. Include only documents you are authorised to share and identify the current revision.

Prefer email? sales@raydafon.com

How your enquiry is handled ↗

A successful submission displays an enquiry reference and is saved for our team. Email delivery is processed separately. Prefer email? sales@raydafon.com

More from the same Raydafon company

Explore our related product expertise